Black Panther 3D Printed with Mamorubot PLA Filament - Black

Posted by Xtron Admin on

Print Settings

Printer

  • Filament - Mamorubot PLA 1.75mm Black
  • Printer - CR-10S & Prusa MK3

Quality

  • Layer Height - 0.1 mm

Temperatures

  • Hot End - 205 Celsius
  • Bed - 65 Celsius

Speeds

  • Print Speed - 60mm/s
  • First Layer Speed - 20mm/s
  • Outer Wall Speed - 30mm/s
  • Inner Wall Speed - 60mm/s
  • Infill Speed - 60mm/s
  • Cooling Fan Speed - 100%

Structure

  • Wall Thickness  - 1.2 mm
  • Top and Bottom Layers - 2
  • Infill - 20%

Retraction

  • Distance - 5 mm
  • Speed - 50 mm
  • Maximum Count - 90

Support

  • Support - On

Physical

  • Bed Adhesion - Mamorubot Build Plate
  • Nozzle Type - 0.4mm Brass (Standard)
  • Enclosure - None

Share this post



Newer Post →


Leave a comment

Please note, comments must be approved before they are published.