The Endeavor, The Drakkar by MakerBot using Mamorubot Wood

Posted by Xtron Admin on

Always wondering how to print using wood filament.

Can I use 0.4mm nozzle?

Do I need to change anything on my printer to print wood?

The answer is with our Mamorubot wood filament, you can use your current 0.4mm nozzle and you don't need to change anything on your printer, if you can print PLA, then you can print using our Mamorubot wood filament as well.

Here some pictures of our wood filament.

The Endeavor (https://www.thingiverse.com/thing:478422)

Mamorubot wood

The Drakkar (https://www.thingiverse.com/thing:475672)

Baby Groot (https://www.thingiverse.com/thing:2143549)

Mamorubot Wood PLA - Baby Groot

PRINT SETTINGS

PRINTER

  • Filament - Mamorubot Wood PLA 1.75mm
  • Printer - CR-10S

QUALITY

  • Layer Height - 0.2 mm

TEMPERATURES

  • Hot End - 205 Celsius
  • Bed - 65 Celsius

SPEEDS

  • Print Speed - 60mm/s
  • First Layer Speed - 20mm/s
  • Outer Wall Speed - 30mm/s
  • Inner Wall Speed - 60mm/s
  • Infill Speed - 60mm/s
  • Cooling Fan Speed - 100%

STRUCTURE

  • Wall Thickness  - 1.2 mm
  • Top and Bottom Layers - 2
  • Infill - 20%

RETRACTION

  • Distance - 5 mm
  • Speed - 50 mm
  • Maximum Count - 90

SUPPORT

  • Support - Off

PHYSICAL

  • Bed Adhesion - Mamorubot Build Plate
  • Nozzle Type - 0.4mm Brass (Standard)
  • Enclosure - None

 


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.